How to Install SPC Flooring?

First, stir

1, a pack of self-leveling in accordance with the provisions of the water-cement ratio into the bucket with water, while pouring while stirring.

2, to ensure self-leveling stir, to use high-power, low speed electric drill with a special mixer for mixing.

3, stirring until no lumps of uniform slurry, it is left to mature for about 3 minutes, and then stirred briefly.

4, add water should be strictly in accordance with the water-cement ratio (please refer to the corresponding self-leveling manual). Too little water can affect liquidity. Too much will reduce the strength after curing.

Second, layout

1, will be mixing good self-leveling slurry poured on the construction of the SPC Tiles, it will flow and leveling the ground itself, if the design thickness of ≤ mm, you need to use a special scraper tooth scratch slightly.

2, then allow the construction staff to wear special spikes, into the construction ground, with a dedicated self-leveling deflation roller gently rolling self-leveling surface, the air mixing in the air release, to avoid the bubble surface and interface height difference.

3, Please close the site immediately after the construction is completed, prohibit walking within 5 hours, avoid heavy impact in 10 hours, and lay the SPC Vinyl flooring after 24 hours.

4, winter construction, laying of the SPC Vinyl Plank Flooring should be self-leveling construction after 48 hours.

5, for the self leveling leveling polishing, should be carried out after 12 hours of self leveling construction.