1, keep the floor dry and clean
Do not allow the mop to be wetted with water or scrubbed with alkaline water or soapy water, so as not to damage the brightness of the paint and damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop. Wax once a month (or two months) (wipe the water vapor and smudges before waxing).

2, to prevent the ground from leaking water
In the event of heating or other leakage on the ground, it must be wiped clean in time, not directly sun exposure or baking furnace, so as not to dry too fast, cracking the pvc tile floor.

3, do not put hot water pots and other objects on the vinyl floor
The painted floor cannot be used for a long period of time. Do not cover it with plastic sheets or newspapers. After a long period of time, the paint film will become sticky and lose luster. Also, avoid hot water basins, hot pots, etc. directly on the floor surface. Or grass mats to avoid scalding paint film.

4, the vinyl plank floor stains even if clear
Part of the board surface inadvertently stained should be promptly removed, if oil traces available rag or mop, warm water or a small amount of detergent to wipe, you can also use neutral soapy water plus a little washing spirit scrub. If the stain is serious, this method is ineffective and can be wiped with high quality sandpaper or steel wool. If it is a smear of a drug, drink or pigment, it must be removed before the stain has penetrated the wooden surface. The cleaning method is to wipe it with a soft cloth dipped in furniture wax. If it is still ineffective, it must be rubbed with steel wool and furniture wax. If the surface of the floor is damaged by cigarettes, wipe it with a soft cloth impregnated with furniture wax to restore light. If it is contaminated with ink, it should be wiped in time with a soft wax dip cloth. If it is not valid, it can be wiped with steel wool, furniture wax.

5, the floor to avoid sunlight
After laying the paint plank floor, try to reduce the direct sunlight, so as to avoid excessive irradiation of the paint by ultraviolet rays, premature cracking and aging. Put furniture application rubber or other soft objects on the floor to avoid scratching the floor paint.

6, lift the plastic floor in time to replace
When the floor is in use, if individual floors are found to have warped or fallen off, the floor shall be taken in time to remove old glue and ash, apply new glue, and compact; if the individual floor paint film is damaged or white, 400 water can be used. Sandpaper, soap, and water are used to polish flooring, then wipe clean. After drying, apply a complementary color. After the color is dry, apply a coat of paint. After 24 hours of drying, polish with a 400-grit water-sand paper and then polish with wax.