Actually,pvc adhesive floor also belongs to pvc vinyl floor sheet.However,its thickness can not exceed 3mm.Beyond 3mm, the back glue can not paste on floor tightly.So there is another kidn of vinyl floor sheet, which is also called dry back floor. There is no glue on back, and its installation requires adhesive.And it is important to match the proper adhesive to your type of floor.Please check the following steps to get installation instruction

Step 1

Lay the floor in position.

Step 2

Fold back half of the floor.

Step 3

Using a notched trowel, apply recommended adhesive to the subfloor. Always follow the manufacturer's instructions when applying adhesive.

Step 4

Let the adhesive sit according to instructions. The open time will allow the adhesive to achieve its best hold.

Step 5

Carefully lay the floor back in place and press firmly.

Step 6

Repeat steps 1 through 5 for the other half of the floor. Clean excess adhesive from your vinyl using a solvent recommended by the manufacturer.

Step 7

Roll the new floor from inside to outside with a flooring roller to finish bonding the vinyl to the subfloor. Roll firmly over the entire floor. Bond any seams with a seam sealer, following the manufacturer's directions.

Step 8

Replace the moulding. Plane the door if necessary and rehang.

Step 9

Clean any adhesive residue left on the floor, but don't wash the floor for three days (or whatever the manufacturer recommends). Excessive moisture at this time can affect the adhesive bond.

Step 10

Keep foot traffic at a minimum for 24 hours after installation. The adhesive needs this time to dry and bond.

Step 11

After 24 hours, return the furniture to the space. A sheet of plywood can be placed on a kitchen floor to roll or slide large appliances. Moving furniture and appliances back into place is the most common cause of damage to new flooring.