PVC flooring China manufacturer is bonded by special treatment process. The dimensional stability of the product is excellent. It is suitable for the surface of thermal expansion and contraction. When pasting PVC plastic floor, it is easy to encounter: the colloid has poor fluidity and is not easy to be smoothed when pasted. Make the surface layer wavy and other issues. To prevent this quality problem, plastic floor manufacturers must:

1. Strictly control the surface flatness of the adhesive base layer, and flatten the surface with the concave and convexity greater than ±3mm. Ground leveling must be done using self-leveling cement.

2. Use a toothed scraper to apply the adhesive to make the thickness of the adhesive layer thin and uniform. When scraping, the direction of the coating on the adhesive surface of the base layer and the Vinyl flooring China manufacturer should be intersected vertically and horizontally, so that when the surface layer is laid, the adhesive layer on the adhesive surface is uniform.

3. The construction temperature should be controlled at 15 to 30 degrees, and the relative humidity should be no higher than 70%.

In addition, changes in humidity and temperature after paving can easily lead to "drumming" problems in plastic flooring. This was because the engineering team at the time was not professional enough to lay the moisture barrier.

For the damp southern areas, if the elevations of the indoor ground and the outdoor ground are basically the same, then the groundwater vapor will easily rise in a gaseous state. When a PVC floor with particularly good water resistance is encountered, it will condense below the floor, and over time, it will be destroyed. The stability of the stratosphere is such that cracks occur in the stratosphere. If it is not repaired in time, the uneven grounding of the foundation floor will lead to the "drumming" of the Pvc floor China manufacturer.

In addition, due to the low temperature in winter weather, the plastic floor that has just been laid off will become uneven due to physical effects after being transported. Consumers don't have to question the quality of the floor for this purpose. As long as the floor is placed in a heated or air-conditioned room for a while, the floor can be easily restored.