The correct office homogeneous floor covering method can not only extend the use time of the floor, but also ensure the formaldehyde pollution caused by the bad auxiliary materials. In general, common construction methods for floor covering include direct bonding method, suspension laying method, no glue suspension suspension method, no floor bottom method, keel laying method, and keel floor laying method.

Hardwood flooring generally adopts keel laying method, and reinforced and composite flooring are generally paved by direct bonding method. When the homogeneous PVC floor is generally in good ground conditions, it can be bonded with a special environmentally friendly adhesive. It can be used after 24 hours, which is very convenient and efficient.

Office floor coverings should not have large or small gaps, and do not use the floor with embossed lines to lay, small things falling into the seams or embossed lines. If the gaps or lines are obvious, it is easy stumbled because the soles are not suitable. The homogeneous vinyl floor has been strictly installed, and the seams are very small. The seams are almost invisible from a distance; if seamless welding technology is used, it can be completely seamless, which is impossible for ordinary flooring.

After the office floor is paved, strict and careful acceptance is required. Floor acceptance mainly checks whether the color of the floor is consistent, whether the floor has reverberation, whether the floor is deformed, warp, etc. At the same time, we must pay attention to the health and safety of paving materials.