The SPC core rigid floor China manufacturer is made of polyvinyl chloride (divided into pure new materials, mixed materials, and recycled materials), calcium powder (different grades and stone powder grades), and solvents (both chemical grade and vegetable solvent food grade) pass through High-temperature rolling and hot-pressing color film and pvc wear-resistant layer. After cooling treatment, it undergoes UV process (determines the anti-fouling performance of the floor and does not change the color under sunlight). Finally, The floor cutting and slotting process (determines the strength of the floor lock and the tensile strength).

Common market specifications for rigid core lvt flooring China manufacturer are 3.5mm corresponding to 0.2mm wear-resistant layers, 4.0 substrates correspond to 0.3 wear-resistant layers, 5.0 substrates correspond to 0.3 or 0.5 wear-resistant layers, and 6.0 substrates correspond to 0.5 wear-resistant layers. Special cases are rarely seen. The thickness of the substrate will be described hereinafter.

3.5mm floor is mainly used in places where the frequency of use is not high, some tooling or rental rooms, stores, gyms, restaurants will be renovated after 3-5 years, etc.

4.0mm floor is mainly used in home improvement, office, tooling, hospital office buildings and other places that have requirements on the ground environment and aesthetics, but require a longer service life, basically no problem for 15-20 years depending on the environment.

5.0mm and 6.0mm floors are mainly used in places with high traffic, such as shopping malls and exhibition halls, and require long life.

Therefore, the general thickness of 4.0mm rigid core vinyl plank flooring China manufacturer for home improvement and general tooling is sufficient, we can choose the appropriate one.