1. Firstly, it is necessary to accurately calculate the total area (or the number of blocks) of the anti-static floor required for the construction of the computer room and the number of various accessories (standard ratio 1:3.5, 1:5.2), and leave a margin to avoid waste. Or a shortage.

2. Fully understand the variety and quality of anti-static flooring produced by manufacturers, as well as various technical performance indicators.

3. The load of the anti-static floor should be determined based on the weight of the heaviest

equipment in all equipment in the equipment room. This can prevent some equipment from being overweight and causing permanent deformation or damage to the ESD tile.

4. The anti-static floor is subject to small changes due to the influence of external environmental conditions. That is to say, the external environment temperature is too high or too low, and the anti-static floor expands and expands, and cannot be removed and replaced; when the temperature is low, the anti-static floor shrinks and produces a loose feeling. The amount of shrinkage of the anti-static floor affected by the environment should be less than 0.5mm, and the deflection of the board surface should be less than 0.25mm.

5, anti-static floor surface should not reflect, no slip, corrosion resistance, no dust, no vacuum, easy to clean. as One of the ESD tile manufacturer, we could give you the best product we could. 

We also are one of the top ESD tile China, factory price, good quality. please feel free to contact us.