Glueless Click-Lock SPC Floor Care Instructions

1, after the completion of the laying of the work should be carefully checked whether each Cork Click Flooring tile is indeed stuck on the ground. With water to remove the stain left by construction, do not make the Click-Lock Laminate Flooring damp within seven days after completion. The usual clean: first to sweep the dust and sand and then wipe cloth, but do not use too much water to clean.
2, non-nailed shoes walking on the Floating floor is strictly prohibited;

3, placed on the Click Together floor, should avoid heavy objects rubbed on the floor, the angle should not be too small, if necessary, available wood padding.
4, walking or homework, you can not wear shoes with metal nails, but can not use sharp objects, hard objects on the floor surface scratch and percussion.
5, no hard objects, hardware scored on the floor, especially equipment transport routes and installation of equipment to be padded around the plywood to prevent buckled floor scratches and grease pollution.
6, floor construction is completed, handling equipment is prohibited on the floor when the machine drag (rub rub). Car tires used in production sites try to avoid easy to bleed vinyl tires, it is recommended to use nylon tires.
7, non-corrosive solvents scrub Floating Vinyl flooring surface.

8, the production work area should wear soft-soled shoes or boots into the work area to prevent dust from entering the workplace.
9, non-penetrating ink, mechanical oil pollution of the SPC Vinyl flooring surface.