Although SPC and WPC are not as exaggerated as PVC soft floors, many people buy them.

1) The thickness of SPC flooring vinyl is mostly 4.2 mm, which is a bit thin.

Stone plastic isadded with stone powder. In fact, it is very heavy. The density is about 1.9~2.0 tons, which is about 3 times heavier than wood. Therefore, neither the process nor the actual installation is too thick to be done.

Although the 4.2 mm can already be used as a lock, it is still a bit thin, and it is completely the feel of the plastic piece.

This kind of product should be no problem in commercial use, but if it is used in home, it may be a bit cold and uncomfortable.

2) WPC flooring vinyl thickness is mostly 5.5 mm, still a little thin.

At present, the main force is still based on SPC, and there are very few WPCs.

Cork itself may have formaldehyde release, and it is more difficult to say that it is glued to the back.

3) 8mm WPC vinyl planks should be more reasonable, but unfortunately very few.

The earliest laminate flooring (including the current European and American mainstream flooring) is 8 mm.

The domestic price of 8 mm is more expensive than 12 mm before, because 8 mm requires a higher processing technology.

But then a certain brand began to "mislead" to 12 millimeters, and eventually the whole industry followed up, forming a strange phenomenon of strengthening 12mm in China today.

The thickness of 7~8 mm is closer to our needs from the sense of foot.

From the actual paving construction, it is also easier (as with reinforcement, the ground level is not required).

Moreover, because the thickness is sufficient, the overall life will be longer.