3C-Floor supplies SPC rigid core flooring for U.S. importers, distributors, private-label brands, contractors and project buyers who need factory-direct product development rather than a generic price list. Build a U.S.-oriented program around inch-based plank formats, clearly stated wear layers, click installation, optional backing, marketable wood and stone visuals, OEM cartons and repeat-order specification control. Final construction, testing and documentation are confirmed for the selected product—not assumed from a broad marketing claim.
A strong SPC flooring supplier for the USA market should make the specification easy to verify in U.S. buying language: plank size in inches, wear layer in mil and millimeters, total thickness, backing, surface, click profile, packaging, exact test-document scope and destination logistics. For importers, the most valuable supplier is not simply the one with the lowest FOB number; it is the one that can hold the approved construction, appearance and carton identity across repeat orders.
“SPC flooring supplier USA” can describe two very different sourcing routes: a domestic warehouse distributor with immediate stock, or an overseas manufacturer supplying the U.S. market directly. 3C-Floor fits the second route. That distinction matters because lead time, order size, customization, margin structure and inventory risk are different.
For this route, see the 3C-Floor SPC flooring importer supply program.
U.S. buyers often sell plank size in inches and wear layer in mil, while factory production documents may use millimeters. Writing both units on the quotation, approved sample record and purchase order reduces a simple but expensive source of mismatch.
| Specification | USA Market Direction | Factory / Metric Check | Why Importers Should Record It |
|---|---|---|---|
| Product type | SPC / rigid core vinyl plank | Stone plastic / polymeric rigid-core construction | Prevents confusion with flexible LVT, WPC or laminate. |
| Total thickness | Often merchandised as 4 mm, 5 mm, 6 mm, 7 mm or 8 mm classes | Confirm whether attached pad is included in the stated total | Total thickness does not equal wear-layer thickness. |
| Wear layer | 12 mil / 20 mil / 28 mil directions | Approx. 0.305 / 0.508 / 0.711 mm | One mil = 0.001 inch. Mil is not millimeter. |
| Plank formats | 7 × 48, 9 × 48, 9 × 60 in. are familiar U.S. formats | Metric production dimension must match approved product | Size affects carton, pallet, showroom story and installation look. |
| Surface | Matte, embossed, wood grain, EIR-style and stone directions | Approve gloss, emboss depth, bevel and film together | Two similar color names can look different under showroom lighting. |
| Backing | IXPE / EVA / other agreed constructions | State material, thickness and whether included in total thickness | Backing influences positioning, sound/comfort story and installation planning. |
| Click system | Floating click-lock program | Approve the exact profile, fit and required documentation | Click accuracy affects installer experience, seam quality and claims. |
| Packaging | Private-label cartons, barcode / SKU label, installation information | Lock carton artwork to final product code | Packaging errors can create warehouse and retail problems even when the plank is correct. |
For a deeper comparison, use the SPC wear layer guide for 12 mil vs 20 mil and the SPC flooring thickness guide before fixing the final U.S. assortment.
A U.S. importer should approve SPC flooring as a layered system. The rigid core provides the structural platform; the decorative film creates the visual; the transparent wear layer protects the décor from repeated surface abrasion; the UV/top finish influences cleanability, gloss and light scuff behavior; and an optional attached pad changes the total build and market positioning.
This is why a thicker plank is not automatically more scratch resistant and a 20 mil wear layer is not automatically the best choice for every line. Match the complete construction to the sales channel, traffic, maintenance, subfloor, installation method and target price.
Buyers who want a broader factory capability view can compare this market-specific page with 3C-Floor’s SPC flooring manufacturer program.
Different U.S. channels create different risks. The right product line balances appearance, wear surface, plank format, backing and price position around how the floor will actually be sold and installed.
Prioritize repeatable colors, simple good-better-best tiers, carton clarity, dependable reorders and a specification that sales teams can explain quickly.
Repeat colorsReorder controlBalance renovation speed, practical surface protection, neutral wood visuals, replacement planning and project cost. Avoid paying for features the turnover model does not need.
RenovationValue engineeringCoordinate décor family, embossing, plank width, package identity, SKU naming, sample boards and merchandising before the bulk order is released.
OEM cartonsCollection designStart with traffic, cleaning, installation, substrate and project-document requirements. Do not substitute a retail marketing label for project-specific verification.
Project documentsFit-for-useFor U.S. sourcing, standards and certification claims should be tied to the exact product or certified family. A logo in a catalog does not prove that every thickness, backing, color or construction is covered.
ASTM F3261 is a relevant U.S. specification reference for resilient flooring in plank or tile format with a rigid polymeric core. When a project calls for this standard, confirm the current test/report scope for the exact construction.
FloorScore is an independent VOC-emissions certification program. If it is required by your distributor, project or retailer, verify that the certificate is current and that the exact product family is listed or covered.
ASSURE is an RFCI certification program specifically for rigid-core products such as SPC and WPC. Treat it as a product-scope verification item, not a generic company-level statement.
Many downstream claims are blamed on “SPC quality” when the real problem is a mismatch between plank construction, locking profile, site condition and installation method. U.S. importers can reduce risk by testing assembly with multiple planks, checking edge milling and flatness, reviewing the intended underlayment, and giving installers a product-specific instruction set.
Do not assume attached pad corrects an uneven subfloor. Do not assume every click product uses the same expansion guidance. Do not publish acclimation, radiant-heat or wet-area instructions until the exact product system has been confirmed.
Write both units. A “20 mil” wear layer is about 0.508 mm, not 20 mm and not 0.20 mm.
Total thickness, wear layer, core, UV finish, backing and click profile do different jobs.
Check multiple planks for shade movement, emboss, bevel, flatness, joint fit and carton consistency.
Verify exact product or family scope, current validity and the construction tested.
A correct floor in the wrong carton or with the wrong label can create warehouse, dealer and warranty confusion.
Keep the approved sample, signed specification and color/finish reference tied to the same product code.
Container plan, pallet configuration, port, inland freight and delivery timing change the true landed-cost decision.
Private-label work is more than printing a carton. The strongest programs coordinate product tier, color family, surface, plank format, wear-layer story, backing, packaging, sample board, barcode/SKU logic and reorder naming before launch.
Define value, mainstream and premium positions instead of collecting unrelated SKUs.
Approve color, pattern repeat, gloss, emboss and bevel as one merchandising decision.
Match thickness, wear layer, backing and click system to the intended channel and cost target.
Lock carton artwork, labels, SKU naming, pallet marks and product documents to the approved construction.
For a dedicated branding workflow, review 3C-Floor’s OEM SPC flooring and private-label program.
The goal is to make the bulk order traceable back to the exact sample and written specification that the buyer approved.
State U.S. sales channel, price tier, traffic, plank format, desired visuals, packaging and required documentation.
Compare total thickness, wear layer, backing, surface and click options without over-specifying the product.
Review several planks for color, surface, bevel, joint fit, flatness and overall construction.
Freeze the approved sample and signed technical definition under one SKU or product code.
Approve carton graphics, labels, barcode/SKU details, installation information and pallet marks.
Check the bulk order against the approved construction and agreed inspection scope before loading.
Coordinate packing list, marks, destination port and buyer-required shipping/document details.
Reference the same approved SKU, construction and visual standard on every repeat order.
The page uses only 3C-Floor site images so product, construction, production and application context stay connected to the supplier being evaluated.
3C-Floor’s current public content covers SPC manufacturing, importer supply, OEM rigid-core programs, wear-layer selection, thickness planning, backing options and quality-control support. For a U.S. buyer, the practical value is the ability to discuss the product at the same level the importer must later sell, document and reorder it.
Build a collection around channel, use case and repeatability rather than a random catalog of colors.
Discuss décor, surface, size, wear layer, backing, packaging and labels as one integrated program.
Keep the quotation, approved sample, final technical definition and packaging identity connected to the same SKU.
Start with the core 3C-Floor SPC flooring range when you need a broader product-category view.
A better RFQ reduces revisions and makes supplier quotations easier to compare. Send the market position and the complete construction—not only “SPC 5 mm.”
3C-Floor is positioned here as a factory-direct export supplier for U.S. importers, distributors, private-label brands and project buyers. If you need same-week mixed-pallet replenishment, compare domestic warehouse programs. If you are planning containers, OEM branding or a controlled product line, factory-direct supply gives you more influence over the specification and packaging.
Common U.S.-oriented programs use familiar inch-based formats such as 7 × 48, 9 × 48 and 9 × 60 inches, with total thickness often discussed in the 4–8 mm range and wear layers compared as 12 mil, 20 mil or higher. The best construction depends on traffic, channel, backing, click profile and project requirements.
12 mil is approximately 0.305 mm and 20 mil is approximately 0.508 mm. The wear layer is the clear protective surface above the décor. It should be specified separately from total plank thickness and evaluated together with the UV finish, traffic level and maintenance conditions.
Approve a written construction and a physical sample together. Verify thickness, wear layer, size, backing, color, gloss, embossing, bevel, click engagement, plank flatness, carton information, labels, required test documents and the exact SKU or product family covered by any certification claim.
Yes. 3C-Floor’s public OEM program describes customization around colors, surface textures, plank sizes, wear layers, IXPE/EVA backing, click systems, cartons and labels. Final availability and combination limits should be confirmed during quotation and sample approval.
ASTM F3261 is a relevant U.S. specification reference for resilient flooring with a rigid polymeric core. Buyers may also request programs such as FloorScore for VOC emissions or ASSURE for rigid-core products. Do not assume every certificate covers every SKU; check the current certificate and product scope.
Send the target channel or project, total thickness, wear layer in mil or mm, plank size, surface and color direction, backing, click requirement, quantity, packaging/private-label needs, required tests or certifications, destination port and target launch or delivery window.
These six verified 3C-Floor pages support the U.S. market sourcing decision from product category through importer, manufacturer, wear-layer, thickness and OEM planning.
Send your target market, thickness, wear layer, plank size, surface, backing, colors, quantity, private-label packaging, documentation needs and destination port. 3C-Floor can use that information to discuss a specification-matched factory quotation and sample plan.
For faster comparison, include both U.S. units and metric units where applicable.
